<<Previous Page

Next Page>>
Model Name
Model No.
CONSOLIDATION APPARATUS {AS PER IS 2720 PART XV}
I 10
AUTOLEVEL CONSOLIDOMETER
I 11
PROCTOR NEEDLE (SPRING TYPE)
I 12
PROCTOR NEEDLE (HYDRAULIC TYPE)
I 12.1
PROCTOR COMPACTION APPARATUS :IS 2720 (VIII)
I 13
ABBOT'S COMPACTION APPARATUS
I 14
AUTOMATIC COMPACTION APPARATUS
I 15
RAPID MOISTURE METER :IS 2720 (II); BS 1377; ASTM D2216
I 16
TORSION BALANCE MOISTURE METER
I 16.1
CALIFORNIA BEARING RATIO TEST APP. (LAB. MODEL):IS 2720
I 17
CALIFORNIA BEARING RATIO TEST APPARATUS (FIELD TYPE)
I 17.1
NORTH DAKOTA CONE :(IS 2720 PART XXII)
I 17.2
PROVING RING PENTROMETER (VICKSBERG PENTROMETER)
I 17.3
PLATE BEARING TEST APPARATUS. :(IS 1880)
I 18
SWELL TEST APPARATUS
I 19
STATIC CONE PENTROMETER
I 20
DIRECT SHEAR APPARATUS:IS 2720 (XIII)
I 21
DIRECT SHEAR APPARATUS MOTORISED SINGLE SPEED
I 21.1
DIRECT SHEAR APPARATUS MOTORISED 12 SPEED
I 21.2
VANE SHEAR APPARATUS LABORATORY HAND MOTORISED
I 22
VANE SHEAR APPARATUS LABORATORY MOTORISED
I 22.1
VANE SHEAR APPARATUS FIELD TYPE
I 22.2
LOAD FRAME HAND OPERATED (50 KN CAPACITY)
I 23
LOAD FRAME HAND OPERATED (CAPACITY 100 KNS)
I 23.1
LOAD FRAME ELECTRICALLY OPERATED 50 KNS 5 SPEEDS
I 23.2
LOAD FRAME ELECTRICALLY OPERATED 30 KN 3 SPEEDS
I 23.3
LOAD FRAME BENCH TYPE HAND OPERATED CAPACITY 30 KN
I 23.4
LOAD FRAME BENCH TYPE MOTORISED 30  KN CAPACITY 5 SPEEDS
I 23.5
LOAD FRAME BENCH TYPE MOTORISED SINGLE SPEED
I 23.6
LOAD TRUSS:IS 1888
I 24
POCKET PENTROMETER
I 25
UNCONFINED COMP. TEST APP. PROVING RING TYPE . (HAND OPTD)
I 26
UNCONFINED COMP.TEST APP. PROVING RING TYPE (MOTORISED)
I 26.1
UNCONFINED COMPRESSION TEST APPARATUS SPRING TYPE
I 26.2
SIEVE SHAKER HAND OPERATED:IS 2720 (IV); ASTM D422
I 27
SIEVE SHAKER GYRATORY TYPE
I 27.1
SIEVE SHAKER RO-TAP
I 27.2
SIEVE SHAKER WET TYPE
I 27.3
GRAIN SIZE ANALYSIS APPARATUS
I 28
TEST SIEVES (BRASS FRAME):IS 2720 (IV)
I 29
TEST SIEVES MADE OF G.I.FRAME 30cm Dia
I 29.1
TEST SIEVES (G.I.FRAME)
I 29.2
LIQUID LIMIT DEVICE (Hand Operated):IS 2720 (V) & 9259
I 30
LIQUID LIMIT DEVICE WITH COUNTER
I 30.1
LIQUID LIMIT DEVICE WITH COUNTER AND MOTOR
I 30.2
CONE PENTROMETER
I 30.3
SHRINKAGE LIMIT SET :IS 2720 (VII); BS 1377; ASTM D427
I 31
PLASTIC LIMIT TEST APPARATUS:IS 2720 (V)
I 31.1
SOIL DENSITY :IS 2720 (XIV;XXVIII & XXIX)
I 32
FIELD DENSITY APPARATUS : (SAND REPLACEMENT METHOD)
I 33
PYCNOMETER
I 34
RELATIVE DENSITY APPARATUS
I 35
EXTRACTOR FRAME UNIVERSAL :ASTM D1452
I 36
EXTRACTOR FRAME HYDRAULIC
I 36.1
SOIL TRIMMER HAND OPERATED BENCH TYPE
I 37
SOIL TRIMMER MOTORISED BENCH TYPE
I 37.1
SOIL LATHE MOTORISED BENCH TYPE
I 37.2
SAMPLING AUGER OUTFIT BLADE TYPE : POST HOLE TYPE
I 38A
SAMPLING AUGER OUTFIT SCREW TYPE
I 38B
SAMPLING OUTFIT FOR 1.5" or 38mm DIAMETER SPECIMEN
I 38C
SAMPLING OUTFIT LARGE
I 38D
SAMPLING TUBE (RELIEVED/UNRELIEVED)
I 39
SPLIT SPOON SAMPLER :IS 2131
I 40
STANDARD DYNAMIC PENETRATION TEST :IS 4968 (I)
I 40.1
DAMES AND MOOR SAMPLER
I 40.2
SOIL STIRRER
I 40.3
JODHPUR PERMEAMETER
I 41
PERMEABILITY APPARATUS FOR SOIL :IS 2720 (XVII)
I 41.1
PERMEABILITY APPARATUS FOR SOIL UNIVERSAL TYPE :IS 2720 (XVII)
I 41.2

Model Name
Model No.
Riffle Sample Divider [ No. of slots 14 approximate cap. 2.1dm3 ]
C 1.1
Riffle Sample Divider [ No. of slots 16 approximate cap. 4.4dm3 ]
C 1.2
Thickness Gauge
C 2
Length Gauge
C 3
Sand Absorption Cone And Tamper
C 4
Density Basket
C 5
Cylindrical Metal Measures:IS 10079
C 6
Metal Measures
C 7
Aggregate Impact Value Apparatus:IS 9377; 2386 (IV)
C 8
Aggregate Crushing Value Apparatus 3" dia for 1/8" to 1/4" size
C 9.1
Aggregate Crushing Value Apparatus 6" dia for 3/8" to 3/4" size
C 9.2
Aggregate Crushing Value Apparatus 12" dia for 1" to 2" size
C 9.3
Deval Abrasion Testing Machine:IS 2386 (IV)
C 10
Los Angeles Abrasion Testing Machine-IS: 2386 (Pt. IV)
C 11
Laboratory Ball Mill:IS 4031 [300 X 300mm]
C 12.1
Laboratory Ball Mill:IS 4031 [450 X 450mm]
C 12.2
Dorry Abrasion Testing Machine:IS 2386
C 13
Hydraulic Jacks
D 1
Proving Rings [ Capacity 25 KG ]
D 2.1
Proving Rings [ Capacity 50 KG ]
D 2.2
Proving Rings [ Capacity 100 KG ]
D 2.3
Proving Rings [ Capacity 250 KG ]
D 2.4
Proving Rings [ Capacity 500 KG ]
D 2.5
Proving Rings [ Capacity 1000 KG ]
D 2.6
Proving Rings [ Capacity 3000 KG ]
D 2.7
Proving Rings [ Capacity 5000 KG ]
D 2.8
Proving Rings [ Capacity 10000 KG ]
D 2.9
Proving Rings [ Capacity 200-250 KN ]
D 2.10
Proving Rings [ Capacity 500 KN ]
D 2.11
Proving Rings [ Capacity 1000 KN ]
D 2.12
Proving Rings [ Capacity 2000 KN ]
D 2.13
Proving Rings [ Capacity 3000 KN ]
D 2.14

Model Name
Model No.
Pendulam Impact Testing Machine
E 1
Torsion Testing Machine : For Wires
E 2
Torsion Testing Machine : For Rods
E 3
Tensile Testing Machine :IS 456
E 4
Universal Testing Machines
E 5
Spring Testing Machines
E 6

Laboratory Pulveriser
F 1
Lab. Jaw Crusher
F 2
Lab. Jaw Crusher [4"X6"WithMotor 3HP 3PH]
F 2.1
Lab. Jaw Crusher [6"X8" With Motor 5 HP 3 PH]
F 2.2
Lab. Jaw Crusher [8"X12" With Motor 10 HP 3 PH]
F 2.3
Lab. Jaw Crusher[12"X16"With Motor 10 HP 3 PH]
F 2.4
Lab. Jaw Crusher[12"X20"With Motor 15 HP 3 PH]
F 2.5
Coal Jaw Crusher [4"X10"With Motor 3 HP 3 PH]
F 3.1
Coal Jaw Crusher [6"X12"With Motor 5 HP 3 PH]
F 3.2
Coal Jaw Crusher [8"X16"With Motor 10 HP 3 PH]
F 3.3
Coal Jaw Crusher[12"X22"With Motor 15 HP 3 PH]
F 3.4
Roll Crusher [4"X8"With Motor 3 HP 3 PH]
F 4.1
Roll Crusher [4"X10"With Motor 3 HP 3 PH]
F 4.1
Roll Crusher [6"X10"With Motor 3 HP 3 PH]
F 4.2
Roll Crusher [6"X12"With Motor 5 HP 3 PH]
F 4.3
Roll Crusher [10"X12"With Motor 5 HP 3 PH]
F 4.4
Hard Groove Grindability[With Motor 1/4HP Single PH]
F 5

Model Name
Model No.
Compression Testing Machine 100 KN Capacity :IS 516
A 10.1
Compression Testing Machine 250 KN Capacity
A 10.2
Compression Testing Machine 500 KN Capacity
A 10.3
Compression Testing Machine 500 KN Capacity
A 10.4
Compression Testing Machine 1000 KN Capacity
A 10.5
Compression Testing Machine 1000 KN Capacity
A 10.6
Compression Testing Machine 500 KN Capacity
A 11.1
Compression Testing Machine 500 KN Capacity
A 11.2
Compression Testing Machine 1000 KN Capacity
A 11.3
Compression Testing Machine 1000 KN Capacity
A 11.4
Compression Testing Machine 2000 KN Capacity
A 11.5
Compression Testing Machine 2500 KN Capacity
A 11.6
Flexure Testing Machine / Beam Testing Machine :IS 9399
A 12
Slump Test Apparatus
A 13
VEE-BEE Consistometer
A 14
Flow Table
A 15
Kelly Ball Penetration Aappratus
A 16
Compaction Factor Apparatus
A 17
Proctor Penetrometer
A 18
Pocket Concrete Penetrometer
A 19
Concrete Test Hammer (Small)
A 20
Bulk Density Measure
A 21
Bulk Density Measure
A 21.1
Air Entrainment Meter (5dm3)
A 22
Air Entrainment Meter (10dm3)
A 22.1
Air Entrainment Meter (100dm3) Aggregate 75 mm
A 22.2
Air Entrainment Meter (100dm3) Aggregate 100 mm
A 22.3
Cube size 50 X 50 X 50 mm 
A 23.1
Cube size 70.6 X 70.6 X 70.6 mm
A 23.2
Cube size 100 X 100 X 100 mm
A 23.3
Cube size 150 X 150 X 150 mm
A 23.4
Cube size 200 X 200 X 200 mm
A 23.5
Cube size 300 X 300 X 300 mm
A 23.6
Cube size 600 X 600 X 600 mm
A 23.7
Beam Moulds 100 X 100 X 500 mm100 X 100 X 500 mm
A 23.8
Beam Moulds150 X 150 X 700 mm
A 23.9
Beam Moulds 150 X 150 X 750 mm
A 23.10
Beam Moulds 40 X 40 X 160 mm
A 23.11
Cylinderical 150mm Dia X 300mm height
A 23.12
Cylinderical 100mm Dia X 200mm height
A 23.13
Capping test cylinders of 150mm X 300mm height(Horizontal)
A 24.1
Capping test cylinders of 100mm X 200mm height(Horizontal)
A 24.2
Capping test cylinders of 150mm dia X 300mm height
A 24.3
Capping test cylinders of 100mm dia X 200mm height
A 24.4
Concrete Mixer(Laboratory Model)IS 1791
A 25
Jolting Apparatus
A 26
VIBRATING TABLE 500mm X 500mm
A 27.1
VIBRATING TABLE 600mm X 600mm
A 27.2
VIBRATING TABLE 1000mm X 1000mm
A 27.3
VIBRATOR INTERNAL (Needle Vibrator):IS 2505
A 27. 4
Compressometer
A 28
Extensometer
A 29
Permeability 1 Cell Model for 150mm Concrete Cube made of Mild Steel
A 30.1
Permeability 3 Cell Model for 150mm Concrete Cube made of Mild Steel
A 30.2
Permeability 3 Cell Model for 150mm Concrete Cube made of Gun Metal
A 30.3
Permeability 1 Cell Model for 100mm Cement & Mortar
A 30.4
Permeability 3 Cell Model for 100mm Cement & Mortar
A 30.5
Permeability 1 Cell Model for 150mm Cement & Mortar
A 30.6
Permeability 3 Cell Model for 150mm Cement & Mortar
A 30.7
Curing Tanks/Chambers
A 31.1
Accelerated Curing Tanks
A 31.2
Humidity/Moist Cabinets
A 31.3

Model Name
Model No.
AUTOMATIC WATER STILL
J 1
WATER BATH RECTANGULAR (SINGLE WALL)
J 2
WATER BATH RECTANGULAR (DOUBLE WALL)
J 2
SEROLOGICAL WATER BATH
J 2
WATER BATH (HIGH PRECISION)
J 2.10
WATER BATH INCUBATOR (METABOLIC SHAKING INCUBATOR)
J 2
HIGH TEMPERATURE OIL BATH
J 2
OVEN UNIVERSAL (MEMMERT TYPE) Temperature Range 250 Deg.C.
J 3A
OVEN UNIVERSAL (MEMMERT TYPE) Temperature Range 300 Deg. C.
J 3B
OVEN FOR ARTIFICIAL LIMB CENTRE
J 3C
HEAT PAN FOR ARTIFICIAL LIMB CENTRE
J 3D
INDUSTRIAL OVEN OR DRIER
J 3E
INCUBATOR BACTEROLOGICAL (MEMMERT TYPE)
J 4A
B.O.D. INCUBATOR (LOW TEMPERATURE INCUBATOR)
J 4B
HUMIDITY CABINET /CONDITIONG CHAMBER
J 5A
HUMIDITY CABIENT/CONDITIONING CHAMBER
J 5B
MUFFLE FURNACE : TEMP. RANGE 950 DEG.C
J 6A
MUFFLE FURNACE : TEMP. RANGE 1200 DEG.C.
J 6B
SHAKING MACHINE (WRIST ACTION)
J 7A
SHAKING MACHINE (WAGNERS)
J 7B
SHAKING MACHINE (RECIPROCATING KAHN TYPE)
J 7C
UNIVERSAL SHAKING MACHINE ( MULTIPURPOSE)
J 7D
ROTARY SHAKER
J 7E
MELTING POINT APPARATUS
J 8
MAGNETIC STIRRER
J 9
MULTIPLE SPINDLE STIRRER OR FLUCULATOR
J 10
SHAKER VORTEX : (TEST TUBE SHAKER)
J 11
LABORATORY RECTANGULAR HEATING PLATE
J 12A
LABORATORY ROUND HEATING PLATE
J 12B
LABORATORY DOUBLE ROUND HEATING PLATE
J 12C
VACCUM EVAPORATOR (RINCO TYPE)
J 13
V.D.R.L. TUBE ROTATOR : (CLINICAL ROTATOR)
J 14
VACCUM PUMP ROTARY
J 15
VACCUM PUMP ROTARY
J 16
GRINDING MILL OR WILLY MILL
J 17
LAB. BALL MILL
J 18

Model Name
Model No.
Tile Flexure Strength Testing Machine
H 1
Tile Abrasion Testing Machine IS 1237,1706
H 2
Thickness Measuring Device
H 2.1
Glazed Tile Test Autoclave[10”X14”made of Mild Steel]
H 3.1
Glazed Tile Test Autoclave [12” X 16” made of Mild Steel]
H 3.2
Glazed Tile Test Autoclave [14” X 18” made of Mild Steel]
H 3.3
Glazed Tile Test Autoclave [18” X 22” made of Mild Steel]
H 3.4
Glazed Tile Test Autoclave [10” X 14” made of Stainless Steel Chamber/LID OF M.S]
H 3.5
Glazed Tile Test Autoclave [12” X 16” made of Stainless Steel Chamber/LID OF M.S]
H 3.6
Glazed Tile Test Autoclave [14” X 18” made of Stainless Steel Chamber/LID OF M.S]
H 3.7
Glazed Tile Test Autoclave [18” X 22” made of Stainless Steel Chamber/LID OF M.S]
H 3.8

Model Name
Model No.
Vicat Needle Apparatus IS 5513
B 1
Ring Mould/Split Mould
B 1.1
LE-CHATELIER Mould:IS 266
B 2
LE-CHATLIER Water Bath
B 2.1
Cement Autoclave (Lab. Model):IS 4031
B 3
Shrinkage Bar Mould :IS 10086 & 4031
B 3.1
Length Comparator :IS 4031
B 3.2
Flow Table ( IS 5512)
B 4
Flow Table ( IS 6932 Part VIII)
B 4.1
Cube Mould
B 5.1
Vibrating Machine:IS 10080
B 5.2
Mixing Apparatus (Mortar Mixer Planetary Type):IS 10894
B 5.3
Cement Spatula
B 5.4
Gauging Trowel:IS 4031
B 5.5
Trowel
B 5.6
Cement Tensile Testing Machine:IS 269
B 6 A
Single gang (Briquette Mould :IS 266 )
B 6.3.1
Triple gang (Briquette Mould :IS 266 )
B 6.3.2
Brazilian Test Apparatus
B 7
Permeability Testers (IS: 1727;2645)
B 8
Blain Air Permeability Apparatus :IS 5516
B 9

<<Previous Page

Next Page>>


*NOTE : Specifications are subject to change without notice.