|
||
| |
|
| MOULDING OF CEMENT AND MORTAR SPECIMENS | ||
| Modern test procedure require specimens of contents, limes and related materials, when formed into mortar, to be cast in certain standard shapes and sizes for determining the mechanical properties of the material which enables the proper quality control of materials. | ||
|
Model
No. |
Description
(Sizes) |
Display |
| B
5.1 |
Cube
Moulds Made of steel, size 70.6mm supplied with base plate. |
|
| B
5.2 |
VIBRATING
MACHINE:IS 10080 SYTEX vibrator is mounted over coiled springs. The vibrations are by means of a revolving shaft with an eccentric. The frequency 12000 plus minus 400 vibrations per minute. The centre of gravity of the vibrator including the cube and mould is either at the centre of the eccentric shaft or within 25mm below it. It is easy for assembling and dismantling of cube mould. Vibrating machine is provided with belt guard and a time switch. The vibrating machine is suitable on 220 /230V 50 cycles, single phase , A.C. Supply The machine can be supplied with NCCBM certificate for frequency. |
Click Here
  Click Here  |
| B
5.3 |
MIXING
APPARATUS (MORTAR MIXER PLANETARY TYPE):IS 10894 Mixes the samples through a planetary movement for the most uniform mixing of samples |
Click Here
 Click Here |
| B
5.4 |
CEMENT
SPATULA: As per IS 269 for the preparation of tensile specimens. |
|
| B
5.5 |
GAUGING
TROWEL:IS 4031 Pointed type with approximately 210 gms weight. Best quality hard wood handle. |
|
| B
5.6 |
TROWEL 100 to 150mm long blade with straight edges. |
|
| |
||
|