Soil - Sieve Shakers, Partical Size Distribution

SIEVE SHAKER HAND OPERATED:IS 2720 (IV); ASTM D422
This is a light, portable but sturdy sieve shaker for bench mounting. The side to side movement to the carrier which can take up to 7 sieves is through a train of gears operated by a hand wheel. A fly wheel ensures smooth operation.
Normally supplied for 8" dia sieves. 12" model can also be supplied

SIEVE SHAKER GYRATORY TYPE
Carries up to 7 sieves of 8" dia sieves. The shaker is driven by a motor through a reduction gear box. The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction. In addition to the gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. The whole gear mechanism runs in an oil bath.
Suitable for operation on 220/230 volts AC.
Optional Extra: Timer switch 0 - 60 mts.12" Model can also be supplied.

Click Here

SIEVE SHAKER RO-TAP
The Rotap sieve shaker is durably constructed and is run by a electric motor. All running parts operate under oil, machine is easily installed requires no foundation. It reproduces circular motion as well as a tapping motion with a uniform mechanical action. It ensures accurate and comparable results with uniformity not obtainable in hand testing. It consists of a holder for 7 sieves of 8" dia. The sieve holder is connected to a reciprocating mechanism which shakes as well as taps the sieves for uniform sieving. The mechanism is connected to a reduction gear coupled to a motor. Suitable to work on 220/230 volts.

Click Here

SIEVE SHAKER WET TYPE
This is used for determining the proportion of water stable aggregates in soils, particularly for agricultural purposes.
It consists of a water reservoir and a holder for 7 sieves of 8" death sieve holder is connected to a reciprocating mechanism moves up and down in a water reservoir. The reciprocating mechanism is connected to a reduction gear coupled to a motor Suitable for operation on 220/230 volts AC.

GRAIN SIZE ANALYSIS APPARATUS
This apparatus is used for determination of the sub-sieve particle distribution in a soil sample by pipette method. analysis of this kind expressed quantitavely the proportions by weight of the various sizes of particles present in the soil.
It consists of a stand sliding panel which moves up and down by means of a screw allowing pipette to be raised or lowered vertically. Laboratory clamp for holding sedimentation tube is provided to the stand.

*NOTE : Specifications are subject to change without notice.

Sieve Shakers
To make the process of sieving easier and quicker, mechanical sieve shakers, hand driven or electrically operated for dry or wet sieving are offered. These sieve shakers effect more elaborate and standardized sieving action to produce more accurate results and personal errors involved in manual sieving are eliminated. These shakers are used not only in laboratories but are also very popular with the industries where sieving is applied.
Model No.	Description (Sizes)
I 27	SIEVE SHAKER HAND OPERATED:IS 2720 (IV); ASTM D422 This is a light, portable but sturdy sieve shaker for bench mounting. The side to side movement to the carrier which can take up to 7 sieves is through a train of gears operated by a hand wheel. A fly wheel ensures smooth operation. Normally supplied for 8" dia sieves. 12" model can also be supplied
I 27.1	SIEVE SHAKER GYRATORY TYPE Carries up to 7 sieves of 8" dia sieves. The shaker is driven by a motor through a reduction gear box. The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction. In addition to the gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. The whole gear mechanism runs in an oil bath. Suitable for operation on 220/230 volts AC. Optional Extra: Timer switch 0 - 60 mts.12" Model can also be supplied.	Click Here Click Here
I 27.2	SIEVE SHAKER RO-TAP The Rotap sieve shaker is durably constructed and is run by a electric motor. All running parts operate under oil, machine is easily installed requires no foundation. It reproduces circular motion as well as a tapping motion with a uniform mechanical action. It ensures accurate and comparable results with uniformity not obtainable in hand testing. It consists of a holder for 7 sieves of 8" dia. The sieve holder is connected to a reciprocating mechanism which shakes as well as taps the sieves for uniform sieving. The mechanism is connected to a reduction gear coupled to a motor. Suitable to work on 220/230 volts.	Click Here Click Here
I 27.3	SIEVE SHAKER WET TYPE This is used for determining the proportion of water stable aggregates in soils, particularly for agricultural purposes. It consists of a water reservoir and a holder for 7 sieves of 8" death sieve holder is connected to a reciprocating mechanism moves up and down in a water reservoir. The reciprocating mechanism is connected to a reduction gear coupled to a motor Suitable for operation on 220/230 volts AC.
I 28	GRAIN SIZE ANALYSIS APPARATUS This apparatus is used for determination of the sub-sieve particle distribution in a soil sample by pipette method. analysis of this kind expressed quantitavely the proportions by weight of the various sizes of particles present in the soil. It consists of a stand sliding panel which moves up and down by means of a screw allowing pipette to be raised or lowered vertically. Laboratory clamp for holding sedimentation tube is provided to the stand.